Accurate Fishing
Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Scupper balls

  1. #11
    Join Date
    Jul 2018
    Location
    Tequesta
    Posts
    2

    Default

    • Hook & Tackle
    I know this is an old thread but I'll try it anyway. My release well (port side?) appears to be clogged. I don't want to just ram something down the drain not knowing how the system works. Can someone tell me if there is some kind of backflow in the line? The thru-hull doesn't have a flap and the well will hold 1" - 2" of water while at rest and it doesn't drain when I pull the boat.

    Thanks
    Jim

  2. #12

    Default

    Something is stuck first try and hose from under the boat. Kink the hose to increase / decrease pressure.

    If that does not work get a medal coat hanger and make it straight then put it in from under the boat. Happens if you get bait down the hole or small trash.

  3. #13
    Join Date
    Jul 2018
    Location
    Tequesta
    Posts
    2

    Default

    Thanks for the response. I figured it out. I was getting water in the release well from the high speed pickup but the drain valve was closed so it wouldn’t drain.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •